Wu's returned without valid teamnumber

[Veertje]

Sinds gisteren lijk ik algemeen bezig te zijn ipv onder de noemer van het WSF team: http://vspx27.stanford.edu/cgi-bin/main.py...sername=Veertje . Als ik rechtsklik op het icoontje en configure klik lijkt echter alles in orde te zijn (teamnummer staat erbij). What's going on?

[Cycloon]

Mss wat fout gegaan bij de verzending ofzo. Je kan altijd proberen om je teamnummer eens te verwijderen, ok klikken, en dan terug plaatsen. Maar normaal zou daar geen probleem mogen zijn. Het kan mss ook iets eenmalig zijn dat misgelopen is aan de kant van F@H.

Edit: Ik zat net te denken, ben je zeker dat dit jouw WU is? Mss heeft iemand anders ook die naam gebruikt vermits op F@H dezelfde naam door meerdere personen kan gebruikt worden. En veertje lijkt me eigenlijk wel een naam die meerdere mensen zouden kunnen nemen.

[Jan van de Velde]

What's going on?

aucune idée

De kans dat er een tweede "Veertje" in het land zou zijn lijkt me gering. Dan nog, waarom zou dat bij Veertje een melding geven? Als het meldt "without valid teamnumber" kan dat weinig anders betekenen of het teamnummer waaronder het WU werd ingeleverd is om de hemel mag weten wat voor reden niet herkend. Meer dan dat nummer even uit je configuratie gooien, en gelijk er terug in (48658) zou ik ook niet weten wat te doen.

De log en de log-prev maar eens nazien op wat je recentelijk hebt ingeleverd, en dat vergelijken met wat er in je statistieken staat. Je laatste was 338 punten op 16 juni

EDIT>>>>>>>>>>>>>>>>>>>>>

zie dat Veertje zojuist wéér 338 punten heeft afgeleverd. Vraag is dus of er eigenlijk wel iets aan de hand is?

[Veertje]

Voor leesbaarheid: commentaren in groen onder/boven de quotes aangebracht en aandachtspunten in log file rood gemaakt.

--- Opening Log file [June 15 06:05:16]

Launch directory: C:\Program Files\Folding@Home

[06:05:16] - Ask before connecting: No

[06:05:17] - User name: Veertje (Team 48658)

[06:05:17] - User ID: 38758C311C454BD1

[06:05:17] - Machine ID: 1

[06:05:17]

[06:05:17] Loaded queue successfully.

[06:05:17] Initialization complete

[06:05:17] + Benchmarking ...

[06:05:25]

[06:05:25] + Processing work unit

[06:05:25] Core required: FahCore_78.exe

[06:05:25] Core found.

[06:05:25] Working on Unit 01 [June 15 06:05:25]

[06:05:25] + Working ...

[06:05:27]

[06:05:27] *------------------------------*

[06:05:27] Folding@Home Gromacs Core

[06:05:27] Version 1.90 (March 8, 2006)

[06:05:27]

[06:05:27] Preparing to commence simulation

[06:05:27] - Looking at optimizations...

[06:05:28] - Files status OK

[06:05:36] - Expanded 3640136 -> 18751629 (decompressed 515.1 percent)

[06:05:46]

[06:05:46] Project: 2621 (Run 16, Clone 89, Gen 27)

[06:05:46]

[06:05:47] Assembly optimizations on if available.

[06:05:47] Entering M.D.

[06:06:11] (Starting from checkpoint)

[06:06:11] Protein: p2621_p1475_tet1_03_1 t= 20000.00000

[06:06:11]

[06:06:12] Writing local files

[06:06:12] Completed 118750 out of 125000 steps (95)

[06:06:20] Extra SSE boost OK.

[06:21:41] Writing local files

[06:21:41] Completed 120000 out of 125000 steps (96)

[06:36:26] Writing local files

[06:36:28] Completed 121250 out of 125000 steps (97)

[06:50:47] Writing local files

[06:50:47] Completed 122500 out of 125000 steps (98)

[07:05:14] Writing local files

[07:05:15] Completed 123750 out of 125000 steps (99)

[07:20:02] Writing local files

[07:20:02] Completed 125000 out of 125000 steps (100)

[07:20:02] Writing final coordinates.

[07:20:05] Past main M.D. loop

[07:21:05]

[07:21:05] Finished Work Unit:

[07:21:05] - Reading up to 3024264 from "work/wudata_01.arc": Read 3024264

[07:21:05] - Reading up to 5340844 from "work/wudata_01.xtc": Read 5340844

[07:21:05] goefile size: 0

[07:21:05] logfile size: 57116

[07:21:05] Leaving Run

[07:21:06] - Writing 8472696 bytes of core data to disk...

[07:21:12] Done: 8472184 -> 8174194 (compressed to 96.4 percent)

[07:21:12] ... Done.

[07:21:12] - Shutting down core

[07:21:12]

[07:21:12] Folding@home Core Shutdown: FINISHED_UNIT

[07:21:16] CoreStatus = 64 (100)

[07:21:16] Sending work to server

[07:21:16] + Attempting to send results

[07:21:16] - Couldn't send HTTP request to server

[07:21:16] + Could not connect to Work Server (results)

[07:21:16] (171.64.65.65:8080)

[07:21:16] - Error: Could not transmit unit 01 (completed June 15) to work server.

[07:21:16] Keeping unit 01 in queue.

[07:21:16] + Attempting to send results

[07:21:17] - Couldn't send HTTP request to server

[07:21:17] + Could not connect to Work Server (results)

[07:21:17] (171.64.65.65:8080)

[07:21:17] - Error: Could not transmit unit 01 (completed June 15) to work server.

[07:21:17] + Attempting to send results

[07:21:17] - Couldn't send HTTP request to server

[07:21:17] + Could not connect to Work Server (results)

[07:21:17] (171.64.122.76:8080)

[07:21:17] Could not transmit unit 01 to Collection server; keeping in queue.

[07:21:17] - Preparing to get new work unit...

[07:21:17] + Attempting to get work packet

[07:21:17] - Connecting to assignment server

[07:21:18] - Successful: assigned to (171.64.122.83).

[07:21:18] + News From Folding@Home: Welcome to Folding@Home

[07:21:18] Loaded queue successfully.

[07:22:35] + Attempting to send results

[07:22:36] - Couldn't send HTTP request to server

[07:22:36] + Could not connect to Work Server (results)

[07:22:36] (171.64.65.65:8080)

[07:22:36] - Error: Could not transmit unit 01 (completed June 15) to work server.

[07:22:36] + Attempting to send results

[07:22:37] - Couldn't send HTTP request to server

[07:22:37] + Could not connect to Work Server (results)

[07:22:37] (171.64.122.76:8080)

[07:22:37] Could not transmit unit 01 to Collection server; keeping in queue.

Unit 01 kon nog steeds niet verstuurd worden.

[07:22:37] + Closed connections

[07:22:37]

[07:22:37] + Processing work unit

[07:22:37] Core required: FahCore_79.exe

[07:22:37] Core found.

[07:22:37] Working on Unit 02 [June 15 07:22:37]

Unit 02 wordt gestart.

[07:22:37] + Working ...

[07:22:37]

[07:22:37] *------------------------------*

[07:22:37] Folding@Home Double Gromacs Core

[07:22:37] Version 1.91 (April 11, 2006)

[07:22:37]

[07:22:37] Preparing to commence simulation

[07:22:37] - Looking at optimizations...

[07:22:37] - Created dyn

[07:22:37] - Files status OK

[07:22:55] - Expanded 9489480 -> 34524104 (decompressed 363.8 percent)

[07:22:56] - Starting from initial work packet

[07:22:56]

[07:22:56] Project: 3903 (Run 2726, Clone 0, Gen 4)

[07:22:56]

[07:22:57] Assembly optimizations on if available.

[07:22:57] Entering M.D.

[07:23:06] Protein: IBX in water

[07:23:06]

[07:23:06] Writing local files

[07:23:22] Extra SSE2 boost OK.

[07:23:26] Writing local files

[07:23:26] Completed 0 out of 25000 steps (0) .......(knip)

........

[11:30:01] Completed 4000 out of 25000 steps (16)

[11:59:27] Writing local files

[11:59:28] Completed 4500 out of 25000 steps (18)

[12:05:25] + Attempting to send results

[12:05:25] - Couldn't send HTTP request to server

[12:05:25] + Could not connect to Work Server (results)

[12:05:25] (171.64.65.65:8080)

[12:05:25] - Error: Could not transmit unit 01 (completed June 15) to work server.

Nog een keer geprobeerd unit 01 te versturen, mislukt. En zelfs:

[12:05:25] + Attempting to send results

[12:06:15] - Server does not have record of this unit. Will try again later.

[12:06:15] Could not transmit unit 01 to Collection server; keeping in queue.

Gaat vrolijk door met unit 02:

[12:06:15] + Working...

[12:28:56] Writing local files

[12:28:57] Completed 5000 out of 25000 steps (20).....knip

.......[17:26:44] Completed 10000 out of 25000 steps (40)

[17:56:37] Writing local files

[17:56:37] Completed 10500 out of 25000 steps (42)

[18:06:15] + Attempting to send results

[18:07:07] + Results successfully sent

[18:07:07] Thank you for your contribution to Folding@Home.

[18:07:07] + Number of Units Completed: 291

Mooi, maar welke results hebben we het over? Dit moet dan wel unit 01 zijn.

[18:07:07] + Working...

[18:26:33] Writing local files

[18:26:34] Completed 11000 out of 25000 steps (44).... knip

[18:56:59] Writing local files

.......[20:56:01] Completed 13500 out of 25000 steps (54)

--- Opening Log file [June 16 05:05:26]

Launch directory: C:\Program Files\Folding@Home

[05:05:26] - Ask before connecting: No

[05:05:26] - User name: Veertje (Team 48658)

[05:05:26] - User ID: 38758C311C454BD1

[05:05:26] - Machine ID: 1

[05:05:26]

[05:05:26] Loaded queue successfully.

[05:05:27] Initialization complete

[05:05:27] + Benchmarking ...

[05:05:30]

[05:05:30] + Processing work unit

[05:05:30] Core required: FahCore_79.exe

[05:05:30] Core found.

[05:05:30] Working on Unit 02 [June 16 05:05:30]

Vrolijk nog steeds bezig met unit 02

[05:05:30] + Working ...

[05:05:38]

[05:05:38] *------------------------------*

[05:05:38] Folding@Home Double Gromacs Core

[05:05:38] Version 1.91 (April 11, 2006)

[05:05:38]

[05:05:38] Preparing to commence simulation

[05:05:38] - Looking at optimizations...

[05:05:38] - Files status OK

[05:06:07] - Expanded 9489480 -> 34524104 (decompressed 363.8 percent)

[05:06:11]

[05:06:11] Project: 3903 (Run 2726, Clone 0, Gen 4)

[05:06:11]

[05:06:13] Assembly optimizations on if available.

[05:06:13] Entering M.D.

[05:06:37] (Starting from checkpoint)

[05:06:37] Protein: IBX in water

[05:06:37]

[05:06:37] Writing local files

[05:06:38] Completed 13770 out of 25000 steps (55)

[05:06:57] Extra SSE2 boost OK.

[05:21:33] Writing local files

[05:21:36] Completed 14000 out of 25000 steps (56) .... knip

[05:52:02] Writing local files

......[16:24:37] Completed 25000 out of 25000 steps (100)

[16:24:37] Writing final coordinates.

[16:24:40] Past main M.D. loop

[16:25:42]

[16:25:42] Finished Work Unit:

[16:25:42] - Reading up to 7064324 from "work/wudata_02.arc": Read 7064324

[16:25:42] - Reading up to 995436 from "work/wudata_02.xtc": Read 995436

[16:25:42] goefile size: 0

[16:25:42] logfile size: 20755

[16:25:42] Leaving Run

[16:25:43] - Writing 8177039 bytes of core data to disk...

[16:25:47] Done: 8176527 -> 7818618 (compressed to 95.6 percent)

[16:25:49] ... Done.

[16:25:49] - Shutting down core

[16:25:49]

[16:25:49] Folding@home Core Shutdown: FINISHED_UNIT

[16:25:52] CoreStatus = 64 (100)

[16:25:52] Sending work to server

[16:25:52] + Attempting to send results

[16:26:43] + Results successfully sent

[16:26:43] Thank you for your contribution to Folding@Home.

[16:26:43] + Number of Units Completed: 292

[16:26:47] - Preparing to get new work unit...

[16:26:47] + Attempting to get work packet

[16:26:47] - Connecting to assignment server

[16:26:48] - Successful: assigned to (171.64.122.83).

[16:26:48] + News From Folding@Home: Welcome to Folding@Home

[16:26:48] Loaded queue successfully.

[16:28:08] + Closed connections

[16:28:08]

[16:28:08] + Processing work unit

[16:28:08] Core required: FahCore_79.exe

[16:28:08] Core found.

[16:28:08] Working on Unit 03 [June 16 16:28:08]

Unit 02 succesvol verzonden, unit 03 is gestart.

Inmiddels afgerond (18 juni) en unit04 gestart. Wat mij volgens de log files brengt op 293 afgeronde units. Echter de statistieken (typ in: Veertje) zeggen dat ik 305 afgeronde WU's zou moeten hebben. Dat is iig vreemd.

[Jan van de Velde]

het enige dat mij opvalt is:

Server does not have record of this unit. Will try again later.

maar 6 uur later wordt het inderdaad weer geprobeerd, en lukt het. Hij wordt bijgeteld, en dat was het.

Terwijl een ontvangstserver problemen heeft (dat was hier het geval) krijg je wél nieuw werk toegewezen, en werk je overigens gewoon door. Als een server problemen heeft schakelt FAH na een aantal keren proberen automatisch over naar elke 6 uur proberen om de boel alsnog af te leveren.

Wat mij volgens de log files brengt op 293 afgeronde units. Echter de statistieken (typ in: Veertje) zeggen dat ik 305 afgeronde WU's zou moeten hebben. Dat is iig vreemd.

Ooit, denkelijk ergens in het begin (na 305-293 = 12 WU's) , FAH opnieuw geïnstalleerd, of FAH (ook) op een andere machine gedraaid? (her)installeer FAH en de logteller begint bij nul. Mijn totaal staat over vele verschillende machines verdeeld. Ten eerste omdat ik met drie machines én een usb-stick draai, en dát sommetje klopt ook niet omdat ik her en der nogal eens opnieuw installeerde.

Sinds gisteren lijk ik algemeen bezig te zijn ipv onder de noemer van het WSF team: http://vspx27.stanford.edu/cgi-bin/main.py...sername=Veertje

ik had er al eerder naar geprobeerd te kijken, maar steeds op ogenblikken dat die server bezig was met updaten. Nu kan ik er wél bij en zie ik dit:

Donator Veertje

Team Default (includes all those WU returned without valid team number) (0)

Score 135 (certificate)

Donator Rank 794658 of 1009597

WU 1 (certificate)

Date of last

work unit None

Active processors

(within 50 days) 0

Active processors

(within 7 days) 0

Deze WU is in ieder geval al langer dan 50 dagen geleden ingeleverd. En vermoedelijk is daar iets elektronisch misgegaan met het teamnummer.

Wanneer dat is gebeurd kan ik niet terugvinden. Kakaostats kent maar één Veertje, maar ja, die geeft alleen 'actieve' vouwers weer. En EOC gaat ook niet verder dan 600 en nogwatduizend vouwers, terwijl de spookveertje volgens FAH op plaats 700ennogwatduizend zou moeten staan.

Pwah, een WU-tje van 135 punten kwijt...... laten we daardoor niet in de zenuwen raken. Momenteel staan er trouwens twee projecten van 135 punten in de projectlijst, 2587 en 2588. Daarvan zul je dan denk ik ook in je fahlog-prev (je vorige log, dat hij nog even bewaart tot er weer eentje vol is) waarschijnlijk ook geen spoor terugvinden, dat zal wel te lang geleden zijn.

[Cycloon]

[12:05:25] + Attempting to send results

[12:06:15] - Server does not have record of this unit. Will try again later.

[12:06:15] Could not transmit unit 01 to Collection server; keeping in queue.

Deze melding is normaal. Die krijg ik ook (ook 3 WUs in de wachtrij voor de server xxx.xxx.65.65). En op het F@H forum is de uitleg te vinden waarom die error wordt verstuurd, maar het is zeker normaal